Skip to content
BIENVENUE SUR NOTRE NOUVELLE BOUTIQUE
Deals
AM-DETAILING / OUR BRANDSLiquid Elements / AM-DETAILING

WASHING · POLISHING · DRYING

Liquid Elements.
From washing
to finishing.

Polishers, pads, washing products and accessories: discover Liquid Elements at AM-Detailing in Fraire, in the province of Namur. Prepare your vehicle, work on its finish and maintain your equipment.

Explore the selection Understand the range
T4200 15mmT4200 / LIQUID ELEMENTS
YOUR ROUTINE, STEP BY STEPAM-DETAILING × Liquid Elements

Liquid Elements AT AM-DETAILING

Products and tools for one routine.

Liquid Elements combines car care products with detailing equipment: orbital polishers, pads, microfibres and a dryer. This lets you prepare for regular washing or a correction project, choosing each item for its role.

Start with your need: washing, removing contamination, correcting defects or making drying easier. A machine alone is not enough: pad and polish choice, surface preparation and wiping quality also matter. Our selections help you build the right combination.

Get advice on Liquid Elements

Machine, pad, polish: consider the whole setup.

For polishing, look for a setup suited to the clear coat and defects. Start with a test spot and adjust the combination rather than always choosing the most abrasive product.

PolishersPads & polishMicrofibres

01 / Liquid Elements

Prepare for a thorough wash.

Before thinking about shine, start with cleaning. Snow Foam Party handles pre-washing, Pearl Rain mitt washing and Dust Cracker wheel cleaning. The 20 litre bucket with grit guard completes your equipment to organise the routine.

The full Liquid Elements range

PRODUCT DELIVERY

Your Liquid Elements products, delivered to you or nearby.

Delivery to United StatesDelivery charges calculated at checkout.

A CONSISTENT ROUTINE

Clean, correct if needed, then protect.

01

Clean

Start by removing dirt with a suitable wash. Then tackle persistent contamination with a targeted product. A clean surface makes it easier to see which defects really need correction.

02

Correct

Polishing or restoration depends on the surface condition; it is not needed at every wash. Choose an appropriate product and follow its application method. Machine, pad and polish must work together.

03

Maintain

Finish with protection or a finishing product suited to the surface. Then maintain a regular routine with clean accessories and products compatible with any existing treatment.

02 / Liquid Elements

Choose your polisher and pads.

T2000 V4, T3200 and T4200 offer different orbits: 8, 10 and 15 mm. Your choice depends on experience, surfaces and comfort. Add pads with a diameter and density suited to your work.

The full Liquid Elements range

03 / Liquid Elements

From polishing to finishing.

The polish range covers strong correction, a balance of cut and shine, and finishing. Choose your pad and polish combination after a small test spot. Wiping microfibres then remove residue so you can assess the result.

The full Liquid Elements range

04 / Liquid Elements

Dry, protect and maintain your equipment.

Turbo Dry helps blow water from tight spaces, while Wet Seal Ceramic fits into the protection stage on clean, wet surfaces. For glass, explore Active Glass Foam. Remember to care for your microfibres with Towel Reset, so your accessories are clean for the next wash.

The full Liquid Elements range

FREQUENTLY ASKED QUESTIONS

Choosing your Liquid Elements products.

Which Liquid Elements polisher should I choose?

The T2000 V4 has an 8 mm orbit, the T3200 a 10 mm orbit and the T4200 a 15 mm orbit. Do not choose based on orbit alone: consider the areas, pad, polish and your experience. We can help you put together a suitable combination.

What is the difference between Heavy Cut, Medium Cut and Ultra Finish?

1.1 Heavy Cut is intended for stronger correction. 2.4 Medium Cut & Gloss balances correction and shine. 3.7 Ultra Finish is a finishing polish. Clear-coat condition and the pad affect results: a test spot helps avoid working more aggressively than necessary.

Are all pads and backing plates interchangeable?

No. Check the diameter and compatibility with your machine before ordering. Pad size, backing and density must suit your equipment and intended work. If unsure, contact us with the exact polisher model.

What is Turbo Dry used for?

This handheld dryer helps remove water after washing, particularly around mirrors, seals and wheels. It comes with three nozzles and a detachable 8 metre cable. A hydrophobic surface helps water move more easily.

Where can I buy Liquid Elements in the province of Namur?

AM-Detailing sells Liquid Elements online and in Fraire, in the municipality of Walcourt. Shop in person by appointment or collect your order. Contact us before visiting to arrange a time.

THE AM-DETAILING NEWSLETTER

News and offers from the shop.

Receive AM-Detailing news, new arrivals and offers on Liquid Elements and all our other brands.

Unsubscribe at any time. Privacy

FRAIRE · WALCOURT · PROVINCE OF NAMUR

Find Liquid Elements in the province of Namur.

AM-Detailing welcomes you in Fraire to choose products and get advice. Shop in person by appointment or collect your online order.

AM-Detailing
Rue Trou Baudouin 9
5650 Fraire (Walcourt), Belgium
Book an appointment Get directions
Liquid Elements × AM-DETAILINGBrowse Liquid Elements products

Added to your cart

Search